Anbieter: Arctic
Arctic P12 PWM PST RGB 0dB Semi-Passive 120mm Single Fan with Analogue RGB (Black) (ACFAN00186A)
Beschreibung
Arctic P12 PWM PST RGB 0dB Semi-Passive 120mm Single Fan with Analogue RGB
RGB for Full Colours
The P12 PWM PST RGB 0dB has 12 analogue RGB LEDs in the center fan wheel. These can be controlled uniformly and are compatible with the common RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the RGB mainboard connection or an external controller and synchronised with the illumination of other hardware.0 dB Mode — Zero rpm
The speed of the P12 PWM PST RGB 0dB can be throttled a standstill via PWM. This allows for silent operation in IDLE and at the same time guarantees maximum performance when needed.Maximum Smoothness, Minimum Vibration
The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.
Optimised for High Static Pressure
The P12 PWM PST RGB operates with a focused airflow and high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is, therefore, suitable for use on heat sinks, radiators, and filters.
200 to 2000 rpm Controlled via PWM PST
With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.
High-Quality Plain Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.
| General Specifications | |
| Performance | |
| Fan Speed | 200—2000 rpm PWM Controlled (0 rpm below 5% PWM) |
| Airflow | 48.80 cfm | 82.91 m³/h |
| Static Pressure | 1.85 mmH2O |
| Noise Level | 0.3 Sone |
| Operating Ambient Temperature | 0—40 °C |
| Fan | |
| Fan Frame | Standard |
| Control Type | PWM PST |
| Connector | 4-Pin Connector + 4-Pin Socket |
| Fan Bearing | Fluid Dynamic Bearing |
| Warranty | 6 Years |
| Electric Characteristics | |
| Typical Voltage | 12 V DC |
| Starting Voltage | 5 V |
| Current | Voltage | 0.11 A | 12 V DC |
| Cable Length | 400 mm |
| RGB Specifications | |
| LEDs | 12 A-RGB LEDs |
| Connector | 4-Pin 12 V-G-R-B Connector |
| Current / Voltage | 0.2 A | 12 V DC |
| Cable | 450 mm Cable with 80 mm Sharing Cable, Black |
| Size & Weight | |
| Length | 120 mm |
| Width | 120 mm |
| Height | 25 mm |
| Weight | 131 g |



